Router Table & Saws

Router Table & Saws
Last updated on Tuesday, May 11, 2021 06:26:10 AM Mountain US Time Zone

HOME

Router Lift Animation, Router Table,
Router Lift Jack, Table Locks, Bit Changing, Saw Gauge

Not metal working per se but sometimes a project needs a wooden base.
A low-cost ($10) router lift that uses a 2-ton hydraulic
bottle jack. Since this router model is spring-loaded for plunge cuts,
setting the depth while mounted in the table used to be tedious.

Always wear safety glasses & breathing protection.

Veritas Router Table & Accessories Manual
Veritas Router Table Assembly Instructions
Veritas Router Table Base Plate
Veritas Router Table Fence Manual
Veritas Router Table Review
Veritas Router Table Right-angle Sled
Veritas Router Table Work Hold-down Manual

Click on linked thumbnails #ad

Router Lift Animation

Hydraulic lift animation.

Router brass guide set.

More books on using routers.

Click on linked thumbnails #ad

2 styles available, 1-pk or 2-pk:
3-5/8" x 3/4" & 5-1/2" x 1-1/8"

Click on linked thumbnails #ad

Router Table

A router table mounted onto a work stand.
A wooden platform holds the jack
under the spring-loaded router.

Click on linked thumbnails #ad

Router Lift Jack

A self-adhering Teflon pad is on the jack point.

The jack presses against the router.
This Dewalt router, Model DW621,
has a strongly built motor housing.

The jack lifts the router easily &
precisely to set the depth with a gauge.
The valve & lever are easy to manipulate
by hand. A screw holds the jack in place.

Click on linked thumbnails #ad

Table Locks
Since the plunge router has a strong spring, the jack
can lift the table a little, so two latches were installed.
The table was drilled & tapped for 10-24 threads to
accept the eye of the latch. The eye has thread lock on
it & a jam nut. The latches quickly lock & unlock for
bit changes. They are located in-line with the bit.

Bit Changing

Bit-changing features are retained.

Note: Remember to unlock the router
itself before lifting & do not over jack.
A 2-tom hydraulic jack can easily break the weakest
points which are by design, the two low-cost side latches.

Saw Gauge

Combination router bit & saw height gauge.